VollayT V3000 Suite - Geared Shutter Systems
Winder System - WS

The Need

• The Vollay V3000 Suite Winder System (WS) has been developed to provide a range of adjustable shading and screening options in hard to access areas such as elevated balconies or patios.
• To adjust the Louvre using a Winder which can be operated via a drive rod located through a window fame or wall.
• To be available in a range of surface finishes that stand the test of time and comply with Australian Standards.

• Have the option to draw from a wide range of Aerofoil Blade widths to develop a look to complement any building or match existing panels.
• The Blades would be able to operate through a 95º angle, providing the ideal ventilation, shading and screening option for the window.
• Be supported by a range of full length Angles which allow the panels to be bracketed to the external wall to allow installation in either a vertical or horizontal plane. This enables suitable shading, screening and privacy solutions to be achieved for hard to reach windows.

• The system has a choice of four Blade sizes, 55, 68, 90 and 115mm which have two Blade rotation options.
• This system can either close up or down from the horizontal. In the 'closed down' position there is a level or water resistance when you use a full length angle across the top of the panel. These options when opened to the horizontal provide a level of privacy blocking the line of sight from either above or below the panel.

• The Vollay V3000 Suite WS's mechanism is concealed within a 60x40mm extruded aluminium stile.
• The shutter has two aluminium Tilting Rods what are attached to an internal adapter which connects to the desired blade size via a Brass Bush and stainless steel C-Clip.
• The two rods are adjusted via a gearbox which is housed outside an aluminium gear housing and driven by two square cut inter-meshing gears. This action rotates the Blades to the desired angle and holds them in place when at rest.